324 products.

Filter by business area

[Close]

234 products.

[Close all]

High Purity Ethylene Carbonate

High Purity Ethylene Carbonate. As ethylene carbonate is a highly polar solvent and dissolves large amount of electrolyte, it is mainly used in lithium batteries electrolyte solution. It can also readily dissolve polymers leading to use as a release agent and detergent. Our product is high quality with low impurity levels and low moisture. It has earned an excellent reputation for adherence to the strict quality standards demanded by our customers.
CAS: No.96-49-1
EINECS: No.202-510-0
Japan, Chemical Substances Control Law: METI-No. 5-523

Ethylene Carbonate

As ethylene carbonate is a highly polar solvent and dissolves large amount of electrolyte, it is mainly used in lithium batteries electrolyte solution. It can also readily dissolve polymers leading to use as a release agent and detergent. Our product is high quality with low impurity levels and low moisture. It has earned an excellent reputation for adherence to the strict quality standards demanded by our customers.
CAS: No.96-49-1
EINECS: No.202-510-0
Japan, Chemical Substances Control Law: METI-No. 5-523

PTMG

PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (for example MDI, TDI), etc. to make resins with excellent properties.

  • Grades:
    PTMG650、PTMG850、PTMG1000、PTMG1300、PTMG1500、PTMG1800、PTMG2000、PTMG3000、PTMG250(under development)、PTMG4000(under development)
  • CAS No.:
    25290-06-1
  • Japan, Chemical Substances Control Law:
    METI-No. 7-129
  • Japan, Poisonous and Deleterious Substances Control Law:
    Not applicable.
  • Japan, Fire Services Law:
    Hazardous Material Class 4 Petroleums No.3 Hazardous Rank III (PTMG250(under development))
    Hazardous Material Class 4 Petroleums No.4 Hazardous Rank III (PTMG650,850)
    Combustible Materials, Flammable Solids (PTMG1000, 1300, 1500, 1800, 2000, 3000, 4000(under development))

Maleic Anhydride

Maleic anhydride is produced by oxidation of benzene or a C4 hydrocarbon such as butane in the presence of a vanadium oxide catalyst. Maleic anhydride can be converted to maleic acid by hydrolysis and to esters by alcoholysis.

  • CAS: No. 108-31-6 (T)
  • EINECS: No. 203-571-6
  • Japan, Chemical Substances Control Law: METI-No. 2-1101
  • Japan, Industrial Safety and Health Law: ID No. 554 (SDS required)
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Not applicable.

THF

THF (Tetrahydrofuran) is a stable compound with relatively low boiling point and excellent solvency. It is widely-used for dissolution and reaction of various substances. Also it is used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc. Since 1982, Mitsubishi Chemical's Yokkaichi plant has produced high-purity, high-quality THF from butadiene using our proprietary technology.

  • CAS: No. 109-99-9 (T)
  • EINECS: No. 203-726-8
  • Japan, Chemical Substances Control Law: METI-No. 5-53
  • Japan, Industrial Safety and Health Law: No. 5-53, ID No. 367 (SDS required)
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous Material Class 4 Petroleums No.1 (water-soluble liquid). Hazardous Rank II
  • U.N. Class: 3
  • U.N. No.: UN2056

NMP

NMP (N-Methyl-2-Pyrrolidone) is a polar solvent with outstanding characteristics. It has a wide range of applications because it offers very high solvency, high boiling point, low freezing point, and ease of handling.

  • CAS: No. 872-50-4 (T)
  • EINECS: No. 212-828-1
  • Japan Chemical Substances Control Law: METI-No. 5-113
  • Japan, Industrial Safety and Health Law: No. 8-1-1014
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

GBL

GBL has a wide range of practical applications because of its low freezing point, high boiling point, and a unique combination of solvent and electrical properties. It has applications as a solvent for special resins, in photography, in batteries, and as an electrolyte. Also a number of derivatives are synthesized from GBL.

  • CAS: No. 96-48-0 (T)
  • EINECS: No. 202-509-5
  • Japan Chemical Substances Control Law: METI-No. 5-3337
  • Japan, Industrial Safety and Health Law: No. 5-3337
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).Aprotic, polar solvent.

2P

2P (2-Pyrrolidone) is a widely-used solvent with outstanding characteristics. It is miscible with almost all other organic solvents and has a high boiling point.

  • CAS: No. 616-45-5 (T)
  • EINECS: No. 210-483-1
  • Japan, Chemical Substances Control Law: METI-No. 5-112
  • Japan, Industrial Safety and Health Law: No. 5-112
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

12BG

12BG (1,2-butanediol) is a glycol with hydroxyl groups on the first and second carbon of the 4-carbon chain. It can react with a dicarboxylic acid (for example phthalic acid or adipic acid), for use as a polyester polyol or a plasticizer. Moreover, it is also possible to make it react with an unsaturated dicarboxylic acid (for example, maleic anhydride) for use as an unsaturated polyester resin raw material.

  • CAS: No. 584-03-2 (T)
  • EINECS: No. 209-527-2
  • Japan, Chemical Substances Control Law: METI-No. 2-235
  • Japan, Industrial Safety and Health Law: No. 2-235
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

14BG

14BG (1,4-Butanediol) is a straight chain glycol with hydroxyl groups on both ends. It is used as a raw material for high performance polyester and polyurethane resins as well as for industrial chemicals like tetrahydrofuran and gamma-butyrolactone. Since 1982, Mitsubishi Chemical's Yokkaichi plant has produced high-purity, high-quality 14BG from butadiene using our proprietary technology.

  • CAS: No. 110-63-4 (T)
  • EINECS: No. 203-786-5
  • Japan, Chemical Substances Control Law: METI-No. 2-235
  • Japan, Industrial Safety and Health Law: No. 2-235
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

PCD_BENEBiOL™

Polycarbonatediol(PCD) is a linear polycarbonate with hydroxyl groups at both ends. It easily reacts with isocyanate compounds (e.g. MDI, TDI, IPDI, H12MDI) and generates polymers with superior characteristics described below.
The proprietary manufacturing technology of Mitsubishi Chemical Corporation (MCC) enables production of unique composition and higher molecular weight PCDs with stable product qualities. The resins made from MCC’s PCDs "BENEBiOL™" have unique properties that existing resins have not been able to establish. In addition, some of the PCDs’ raw materials are biomass-based.

  • Chemical resistance
  • Hydrolysis resistance
  • Weather resistance
  • Flexibility at low temperature
  • Abrasion resistance
  • High mechanical properties
  • High hardness
  • Biomass-based

DIAPOL™-WMB is a composite material (wet masterbatch) produced by acid coagulation of SBR latex, carbon black and water slurry in an ultradispersion process. It is widely applied as a raw material for industrial products; water seals and gaskets; and tires and belts.

Carbon Black

MITSUBISHI™ Carbon Black is a black pigment that has been used in a wide range of fields such as newspaper ink, printing ink, colored resin, paint, toner, colored paper, India ink, and ceramics. Various grades of carbon blacks are available ranging from all- purpose grade to high-grade. In addition, our line of products includes industrial and environmentally-friendly carbon blacks. CAS No.1333-86-4 Carbon Black Association Handbook 3rd edition (Ref. 1) Carbon Black Association Annual Report No.61 (2011) (Ref. 2)

ESKA is a plastic optical fiber product that exploits the excellent light-transmission properties of acrylic resins. It possesses a number of important characteristics not found in glass optical fiber, including light weight, flexibility, and easy processability. We are marketing ESKA for a wide number of applications in the fields of automotive networks, lighting, sensors, FA (Factory Automation) and data transmission.

Methacrylic resin is an extremely high-quality material and is sometimes referred to as the "queen of plastics" due to having the highest degree of transparency among plastics as well as other excellent properties including weather resistance, chemical resistance, hardness, and attractiveness. This material is used in many products used in everyday life such as automobiles, building materials, household appliances, and optical goods.

SHINKOLITE™ is the registered trade name of Mitsubishi Chemical's continuous cast acrylic sheet. Known as acrylic resin, this material has excellent weather resistance, stainability, and processability properties, and so is used in many applications such as signage, display, large water tanks, LCDs, and light guide plates. We will continue to leverage these properties and develop new products such as the flame-retardant and impact-resistant grades of SHINKOLITE. It is our goal to provide environmentally friendly products that make society safer and help people to have more comfortable and prosperous lives.

TREXPRENE™ TPV (Thermoplastic Vulcanizate) is a heat stabilized, vulcanized PP / EPDM product. Globally available for a wide range of applications and approved to a variety of Automotive Specifications.

TEFABLOC™ is versatile family of thermoplastic elastomers (TPE). Applies to most of the environments and plastic converting processes.
TEFABLOC™ incorporates several technologies including TPE-S, TPO and TPE-E. Among the large scale of possible properties, some of them are also boosted in process by reactor or dynamic cross-linking.The accurate combination of features leads to tightly satisfy application specifications even the most demanding ones.

Halogen Free Flame Retardant (HFFR) olefin based compound with low smoke solutions (LSZH)

VINIKA™ is vinyl based, soft and rigid formulations designed for a wide variety of applications. Fine-tuned properties such as hardness, heat and impact resistance, colour and much more.

LINKLON™

LINKLON™ is a silane crosslinkable polyolefin based resin. The post crosslinking reaction drastically boost the material performance in terms of heat resistance and creep behavior at elevated temperature.

A unique tie-layer resin offering excellent adhesive performance to a variety of materials, covering various applications and requirements for automotive, food/non-food packaging, industry and building/construction.
MODIC™ offers two technologies designed to be used as a tie-resin or for peelable purposes:

Sunprene™ is high performance flexible PVC-P compounds for demanding environments with outstanding aesthetics.

DURABIO™

DURABIO™ is a bio-based polycarbonate resin derived mainly from plant-based isosorbide. Compared with conventional polycarbonate resin (hereafter abbreviated PC resin) made from bisphenol A (hereafter abbreviated BPA), DURABIO™ features high transparency, excellent optical properties, and outstanding scratch resistance. Its puncture impact behaviour are comparable to those for PC resin. DURABIO™ is a plant-derived polymer but is not biodegradable. It has excellent durability, making possible its deployment in a wide variety of applications such as for optical ・energy related components, a substitute for high-performance glass components, as well as for electronic equipment ・ automotive housings ・ interior and exterior decor.

In addition to a superior appearance, DIANAL coating resin gives improved weatherability and resistance to staining and other damage from chemicals. We have a wide range of product lineup including both liquid and solid types to suit all customer needs.

Diabeam is a resin that is cured by irradiation with ultraviolet rays or electronic beams. It is well-regarded as environmentally friendly paint, and used in many different applications including paint, print, and other surface treatments.

jER™

Regarding the jER™ (formerly Epikote™ *) epoxy resin, Mitsubishi Chemical is prepared to support our customers' needs quickly and flexibly. Our production is extremely fast because we have accumulated many years of research with epoxy products. Our manufacturing, sales, research, and development are tightly integrated to enable rapid response to the challenges our customers face. (*Epikote™ is a trademark of Momentive Specialty Chemicals)

jERCURE™ curing agents for epoxy resins are an abundant set of curing agents that cover the full range from low to high curing temperature with functional groups ranging from amine, mercaptan, and phenol to Lewis acid complex compounds. A curing agent can be chosen from this set to fit the application. There are water-based curing agents for water-based epoxy resins, too.

YED is reactive diluents for an epoxy resin that provides low viscosity without compromising the resin's special characteristics.

ADH

CASNo.:
1071-93-8
TSCA:
Listed

Features

ADH is a crosslinker of waterborne acryl emulsions. It is also useful as an epoxy resin hardener and a formaldehyde scavenger.
ADH reacts very rapidly with ketone groups.
For example, it reacts easily with ketone groups of diacetone acrylamide or aldehyde groups of formaldehyde.
In addition, ADH also reacts with the epoxy group like an amino compound.

4HBA

4HBA, with a primary hydroxyl group at the end of a longer alkyl chain, gives excellent scratch resistance due to its high crosslinking ratio and unique flexibility

CASNo.:
2478-10-6
TSCA:
Listed

DAAM

Waterborne coating dryable by crosslinking at room temperature

CASNo.:
2873-97-4
TSCA:
Listed

Features

  • Diacetone acrylamide readily polymerizes and forms copolymers with a wide variety of comonomers.※(1)
  • Diacetone acrylamide reacts with ketone group of adipic acid dihydrazide at normal temperature.
  • Polydiacetone acrylamide has high water absorption.※(2)

Bibliography

  1. ※(1)L.E.Coleman et al.,J.Polymer Sci.,Part A,3 1601 [1965]
  2. ※(2)Y.Takano.Kobunshi Kako,20,680[1971]

TOMICIDE ZPT-100 (Bis(2-pyridylthio-1-oxide) zinc) is used as an industrial fungicide.

STANOCT (tin 2-ethylhexanoate), a resin additive or chemical, is used as a urethane foam catalyst and esterification catalyst.

POLYTAIL™ is a polyhydroxy polyolefin oligomer developed using Mitsubishi Chemical's proprietary catalyst technology. It has a polyolefin skeleton and a terminal hydroxyl (-OH) group. By adding to polyolefin elastomers such as EPDM, etc., POLYTAIL™ creates adhesive, flexibility, lubrication, and dispersive properties.
CAS: No. 68954-10-9 (T)
Japan Chemical Mfg. Reg.: No.6-749
Fire Services Law: Specified combustibles

MKC™ Silicate is an oligomer formed by the partial hydrolysis of tetramethoxysilane. As an additive in paints, it produces a hydrophilic surface that is highly stain-resistant with the self-cleaning effect.

METABLEN is the trade name of modifiers, which have been developed originally by Mitsubishi chemical, a world prominent manufacture of methyl methacrylate resins. Adding a small quantity of METABLEN to various resins improves and increases their impact strength and processability, and further improves the characteristics, the appearance and the productivity of their final products.

METABLEN A type is acrylic-modified PTFE. With small amount of addition, it greatly improves the melt tension that is required in such processing as vacuum molding, foam molding, blow molding and profiling by minimizing increases in melt viscosity without sacrificing the inherent properties of thermoplastics.

METABLEN P type is an acrylic processing aid that offers significant benefits to processors of PVC, ABS, polycarbonate and other thermoplastics. METABLEN P type greatly improves the melt elasticity of thermoplastics and promotes fusion of PVC with addition of low use levels. These products are designed to offer maximum dispersability in much kind of thermoplastics. METABLEN P type is possible to correspond wide range of molecular weight.

METABLEN L type is an acrylic external lubricant that offers exceptional benefits to PVC processors with addition of very low levels. The low use levels mean that there will be scarcely effect on clarity, heat stability, chemical resistance and physical properties. As METABLEN L type introduces low haze contribution and excellent metal release, it is ideal for calendering, blow molding and extrusion applications.


METABLEN C, E, W and S type are a family of core-shell type impact modifiers, each of which offers unique benefits to manufacturers of thermoplastics products. These impact modifiers do not only improve impact strength but also give other additional benefits depending on the selection of rubber.
METABLEN C and E type have butadiene-based rubber to give super high impact strength.
METABLEN W type has acrylic-based rubber to give excellent weatherability.
METABLEN S type has silicone-acrylic-based rubber to achieve both super high impact strength and excellent weatherability.

METABLEN F type acrylic gloss control agent.
This additive is designed to offer maximum dispersibility of thermoplastics. As cross linked particles exist on the surface of final products, the light is dispersed. This structure gives mat appearance to the final product.
METABLEN F type can be also used as a blocking inhibitor for film and sheet.

METABLEN H-602 is an acrylic heat distortion resistant modifier for PVC.

METABLEN H-880 is acrylic copolymer having high compatibility with polycarbonate (PC). METABLEN H-880 improves the surface hardness without deteriorating transparency.

METABLEN TP type is melt-flow improver that maintains good clarity and other properties of polycarbonate (PC).

Tubular plastic tube that shrinks when heated for easy coating. The product is widely used in such applications as insulation, color-coding, protection and falsification prevention.
Download the catalog in PDF format for more information on the features and sizes of products.

A picture of ACRYPLEN(acrylic film).

We have been engaged since 1975 in the development, manufacture, and sale of acrylic (PMMA) films through a combination of our unique in-house polymer design and thin film forming technologies.
ACRYPLEN (acrylic film) features the excellent transparency, weatherability, suitability for heat-molding and lamination processing. In addition, it has outstanding UV protection, making it ideal for use as a construction material, a paint-alternative, and a retro reflective material, as well as for a wide range of applications in the field of optical engineering.
Mitsubishi Chemical is a pioneer in the development of acrylic films, and the Company’s lineup encompasses products with a wide variety of thicknesses, widths, and differing degrees of flexibility/rigidity.

MOSMITE is a biomimetic material made with our unique technology that mimics the fine structure of moth eyes. This fine, nanostructure surface exhibits antireflective properties.

This fiber is lightweight with a specific gravity of 0.91 and hydrophobic (official moisture content of 0%). It also has excellent chemical resistance and can be easily recycled. Pylen is often used in applications that require extended functionality, such as industrial materials, carpets, and clothing.

We offer various forms of materials including UD prepreg in which carbon fibers are drawn uni-directionally and impregnated with resin and cross prepreg which is carbon-fiber-woven cloth impregnated with resin.
In particular, products using DIALEAD, that is ultra-high modulus pitch-based carbon fiber are widely used as materials essential for manufacturing of parts and components for various industrial machines represented by carbon rollers and robot hands. Other applications include sports, construction / civil engineering, and aerospace industries.
The HX1 Series is a prepreg impregnated with special epoxy resin developed on the assumption of use in a high temperature range. Using this prepreg, it is possible to expand the range of applications of CFRP products.

DIALEAD is a pitch-based carbon fiber supported by many proprietary technologies as a result of coal chemistry by Mitsubishi Chemical over many years. The product is widely applied to fields such as aerospace, industry, and sports.

Mitsubishi Chemical continues to develop an ever-expanding value chain from raw materials to final product through the use of PAN-based carbon fiber and pitch-based carbon fiber.

Carbon fibers are one quarter the weight of steel but have about 10 times the strength; thereby creating a light and tough material that is stronger than conventional metal materials. Carbon fibers have a variety of features that include being electrically conductive, strongly wear-resistant, and transparent to X-rays. They are mainly used in composite materials in combination with plastics.
Mitsubishi Chemical's carbon fibers have obtained the Japan Industrial Standard of quality management system for the aerospace and defense industry (JIS Q 9100), and we are continuing to raise our quality control levels further still.

PYROFIL™ carbon fiber and its composites, are advanced high-performance materials born from technology centered on synthetic high polymer chemistry, in which Mitsubishi Chemical excels. We have an integrated framework for production that includes polymerization of acrylonitrile (PAN), spinning of PAN fiber (precursor),carbonization of a precursor (carbon fiber), weaving, prepregging, and chopping of carbon fiber.

DIALEAD composite is a carbon fiber composite material compressed by resin. The formal name is carbon fiber reinforced plastics or CFRP.
Taking advantage of excellent properties not available from conventional metals and ceramics, the product is widely used in various applications.

Pyrofil pellets are a thermoplastic molding material that is made from blending our PAN-based carbon figure Pyrofil product with our pitch-based carbon fiber Dialead with various resins to achieve performance better than typical reinforced resins.

We carefully select the base resin and carbon fiber materials in accordance with specific applications to provide products of the highest quality unmatched in the industry.

We launched the ALPOLIC business in 1971 and major applications were for sign boards and housing materials around that time. ALPOLIC has been recognized in its advantages of high rigidity and superior flatness since the beginning. In the 1980s, we set up a continuous coating line for aluminum coils, and thanks to the coating quality, the features of ALPOLIC were upgraded. Since the 1990s when we completed the improvement of fire retardant plastic core material, ALPOLIC has been widely used as a wall cladding material instead of a solid aluminum panel. In the early 2000s, we started to develop stainless and titanium composite sheets and also added many other color options of our products to meet demand for more attractive designs. Mitsubishi Chemical's ALPOLIC has been in the confidence of customers over 40 years around the world and continues to be a world leading ACM.

Designing comfort and safety of diversifying exterior applications

Our polycarbonate sheets for exterior use are an easy-to-use transparent material with excellent weather and shock resistance. For this reason, it can be bent for installation to fit sashes at room temperature, responding to sophisticated design needs. It also increases the flexibility of future structures as flame resistant roof material to direct sunlight into a house.

The HISHI-NAMI series is applied in such diverse applications as skylights of houses, terrace, balconies, carports, and factories.

HISHIMETAL is a composites material that is produced by laminating PVC film on a base material such as galvanized steel sheets, stainless steel sheets and aluminum sheets. PVC film is a general purpose film and we have employed it as a laminating film for many years.
This material is used in many different industries because it has metal strength and workability in addition to the design qualities and functional properties of plastic film.

EXUM incorporates galvanized steel sheets, stainless steel sheets, and aluminum alloy sheets as a base material. EXUM is a polyester-based plastic film-laminated steel sheet manufactured by our multi-layer extrusion technology.

This material is primarily used in interior applications due to the combination of metal strength, workability, and design qualities.

HISHIMETAL PO incorporates galvanized steel sheets, stainless steel sheets, and aluminum alloy sheets as a base material.

HISHIMETAL PO is a composite material produced by laminating a polyolefin-based film onto the base material.

This material is used for interior and door etc.

HISHIMETAL HG incorporates galvanized steel sheets, stainless steel sheets, and aluminum sheets as a base material. HISHIMETAL HG is a composite material produced by laminating HG film onto the base material using our multi-layer extrusion technology.

This material is utilized primarily in door applications due to its many design options such as metallic designs and similar.

AIRLINER is a duct material with the strength of a steel sheet with the properties of a PVC film.
With functionality only possible in composite materials, this product is used to create more comfortable living environments.

HISHIMETAL EX is a highly functional material produced by laminating various high-performance films on a metal sheet using the HISHIMETAL manufacturing techniques. It has new functionalities including reflectivity, insulation and sliding properties.

HISHIMETAL EX-DR is a metal sheet laminated with a high reflective film.

This product is used as a reflective material for lighting and illuminated signs to help reduce the number of light sources needed.

Roofline system rain gutters offer the complete package of a total roof design and ease of gutter installation.

Rain Gutters

[Close]

We offer a variety of rain gutters that fit with many different designs of homes. You can view gutter CAD data at the rain gutters website.

Airtight design of houses prevents indoor air from leaking outdoors and at the same time shuts outdoor air off, increasing the effectiveness of air conditioning, contributing to energy saving. Furthermore, airtight sheets prevent vapor generated indoors from entering heat-ray intercepting material, eliminating internal condensation and by maintaining performance of heat-insulating material and assists in the prevention of wood corrosion, improves the durability of houses.

A comprehensive range of partitions from Mitsubishi Chemical, Inc. HISHI WALL, designed to be demountable and relocatable, provides a wide variety of designs and reliable high quality for your interior projects. It can be efficiently installed to create a comfortable working environment at offices, hospitals, manufacturing plants, and many other places. With HISHI WALL, you will have unlimited opportunities to change the interior layout according to your future needs.

MAFTEC Blanket is available in a range of densities and sizes for a wide variety of thermal applications up to 1,600 . MAFTEC is manufactured on precisely-controlled, state of the facilities to provide customers with highly consistent properties.


X-ray Scintillator Screen

Scintillator is a material that convert radial ray such as X-ray into the visible light. By using with a light detector such as TFT, CCD, CMOS sensors, The image can be efficiently converted to a digital image. Mitsubishi Chemical has been engaged in research and development more than over a half century and has been succeeded in excellently developing scintillators for digital X-ray imaging by using superior phosphor manufacturing technology and coating technology cultivated in the process we are commercializing those products.

D610A is a mixure of adipates synthesized from straight-chain higher alcohols. It is a plasticizer with excellent plasticization efficiency, cold resistance, and processability that is ideal as a food packaging material.

As DOP shows well-balanced each performance, it is a typical general purpose plasticizer used most widely as a vinyl chloride resin plasticizer.

DOP is a typical general purpose plasticizer used most widely as a vinyl chloride resin plasticizer.DOP-MS is DOP with practically no odor.

Diisononyl phthalate (DINP) is a phthalic acid ester of isononyl alcohol (carbon number 9), and it is used as a plasticizer.

Diisodecyl phthalate (DIDP) is a plasticizer with superior low volatility, heat aging resistance, and soap water extraction resistance, and it is used for wide range of flexible PVC. Since the change of tensile strength or elongation is low after heating, it can be used for the products that are used at relatively high temperature.

Diundecyl phthalate (DUP) is a plasticizer used for flexible PVC. This is phthalate using undecyl alcohol by oxo process, and it is low volatility plasticizer with good miscibility and machinability.

D930 (bis (2-butoxyethyl) phthalate) is used mainly as the plasticizer of flexible PVC, and also as resin reforming agent since it has miscibility with many resins due to having an ether bond in its molecule.

M170 is a plasticizer with superior antistatic performance by blending special additive, D930 (Bis (2-butoxyethyl) phthalate) and D610A (Di-n-alkyl adipate).

By blending special additive to D930 (Bis (2-butoxyethyl) phthalate), D950 has drastically been improved the antistatic performance, and also has superior heat resistance.

Di(2-ethylhexyl) adipate (DOA) is a cold resistant plasticizer giving superior low temperature flexibility against vinyl chloride resin and synthesized rubber.It also has superior heat and light stabilities, and machinability is good for a cold resistant plasticizer.

Diisononyl adipate (DINA) is a adipate ester of isononyl alcohol (carbon number 9).It is appropriate for wide range of application as a plasticizer.

Benzoic acid glycol ester JP120 has the highest polarity of any plasticizer from J Plus Co., Ltd. and is miscible with a variety of resins.

Bis(2-ethylhexyl) terephthalate (J110) is a plasticizer that is compatible generally with soft vinyl chlorides and that has better heat-aging resistance and electrical insulation properties, compared to DOP.

Acetyl tributyl citrate (ATBC) has low toxicity when used as a plasticizer for vinyl chloride resins and is ideal for food packaging.It also has good workability.

D640A has a relatively low molecular weight for a member of the polyester adipate plasticizer product group. It has good workability and excellent cold resistance, in addition to its oil resistance, low volatility, and non-migration property.

The polyester adipate plasticizer product group offers excellent oil resistance and non-migratory property, as well as low volatility. D643D is characterized within its product group by its relatively large molecular weight and good heat-aging resistance characteristics.

D623N, which has a relatively high molecular weight for a member of the polyester adipate plasticizer product group, offers excellent heat-aging resistance, as well as oil resistance, low volatility, and non-migratory property.

D620N has a molecular weight of 800, which is relatively low for a polyester adipate plasticizer. It has excellent workability and cold resistance, in addition to its oil resistance, low volatility, and non-migratory property.

The polyester adipate plasticizer product group offers excellent oil resistance and non-migratory property, as well as low volatility. Additionally, D633 has a relatively high molecular weight for the product group and excels in terms of heat-aging resistance and non-migration into ABS.

The polyester adipate plasticizer product group offers excellent oil resistance and non-migratory property, as well as low volatility.In addition, D645 has high molecular weight for a member of the polyester adipate plasticizer product group and excellent heat-aging resistance.

D643 is a general-purpose polyester plasticizer that performs like other polyester plasticizers in terms of oil resistance, low volatility, non-migratory property, and so forth. It also offers a balance between cold resistance and plasticization efficiency.

Polyester adipate plasticizer product group has superior oil resistance, low volatility, and non-migratory property.D623 has molecular weight of approximately 1800, having relatively high molecular weight for a member of the polyester adipate plasticizer product group, and has superior oil resistance, heat deterioration property, and non-migratory property.

D621 is a polyester adipate plasticizer with molecular weight of approximately 1,200, and it has superior oil resistance, low volatility, and non-migratory property.

D620 is a polyester adipate plasticizer with molecular weight of approximately 800.It has superior oil resistance, low volatility, and non-migratory property.D620 has low molecular weight for a member of the polyester adipate plasticizer product group, has good workability, and superior cold resistance.

TOTM-NB is the TOTM without antioxidant added.This is a durable plasticizer with superior low volatility, electrical characteristics, heat deterioration resistance, and soap water resistance, and has superior non-migratory property against ABS resin.

Trioctyl trimellitate (TOTM) is a durable plasticizer with superior low volatility, electrical characteristics, heat deterioration resistance, and soap water resistance.

D931 (Bis(2-butoxyethyl) adipate) is a plasticizer with cold resistance property as its feature.Since it has an ether bond in its molecule, it has miscibility with many rubber and resin materials.

DIDA (Diisodecyl adipate) is a plasticizer with low volatility and cold resistance properties.

In this application, acrylic panels should not be a protagosist. We provide acrylic panels that allow people to view fish, animals, or experimental apparatus clearly without noticing the panel itself.
We can also create aquariums and other devices with curved and circular shapes thanks to main characteristics features of acrylic panels, such as the good formability and durability. For large panel applications that cannot be transported, we can perform special chemical jointing processes at the installation site. Our acrylic panels are used in not only domestic but also overseas aquariums.

Acetoguanamine is used as a modifier of melamine.

Nichigo G-Polymer, which can be used to freely control crystallinity and the cohesive power of the noncrystalline part, is the next generation of vinyl alcohol resins.
In addition to outstanding transparency and solvent resistance, through the combination of “low crystallinity” with “high hydrogen bonding strength,” which are traits that are ordinarily in conflict, this new material realizes functions that had not been possible with conventional PVOH. These include low melting points, high stretching characteristics and high gas barrier performance, as well as low foaming, aqueous solution stability and emulsification performance.

In COPONYL, there are acrylic copolymer resin, vinyl acetate/acrylic copolymer resin, cohesive and adhesive agents in weak solvent resin, and painting/coating grades.
NOTE: COPONYL is a registered trademark of The Nippon Synthetic Chemical Industry Co., Ltd. (NIPPON GOHSEI).

Solvent ME is mixed solvent with 80% of methyl acetate and 20% of methanol.Solvent ME is used as solvent for painting and for can washing.

Solvent ME is mixed solvent with 80% of methyl acetate and 20% of methanol.Solvent ME is used as solvent for painting and for can washing.

SoarnoL™ EVOH (ethylene vinyl alcohol copolymer) is a world renowned gas and hydrocarbon barrier resin used in multilayer barrier packaging.

Soarlite is the trade name of ethylene-vinyl alcohol copolymer for injection molding application as engineering plastics.

Soaresin is used as a modifier of resin or as a stabilizer for extrusion.

Hi-Selon is a water-soluble film made from polyvinyl alcohol.It is available in a wide range of types, from those that are soluble in cold water to those that are soluble in hot water, to respond to diverse needs.With its excellent heat-sealing property and printability, Hi-Selon is ideal for use as a packaging material, but it also provides many other advantages, including high solvent resistance and gas barrier performance, which benefit diverse applications and are widely used as materials for packaging agricultural chemicals and pharmaceuticals, hygiene purposes, printing on curved surfaces, and as base materials for wigs and embroidery.

Reny is our brand name of high performance polyamide compound reinforced with glass fiber, carbon fiber or mineral fillers, based on proprietary polyamides (mainly polyamide MXD6) developed by Mitsubishi Gas Chemical Company, Inc. Reny generally has he highest mechanical strength and modulus  in engineering plastics, most suitable for replacement of metal parts.

Iupital is a high-grade polyacetal (POM) resin using proprietary “copolymer” manufacturing technology of Mitsubishi Gas Chemical Company, Inc. The integrated production system, which takes the raw material methanol through POM resin polymerization to the end product (pellet), enables us to consistently manufacture and supply high-quality products. To meet a wide range of customer requirements, Iupital is produced in a variety of grades. These include high-performance grades, which make Iupital ideal for applications in such fields as electronics, office automation (OA) equipment, automobiles and precision machinery.

Iupiace is our modified polyphenylene ether (m-PPE) resin products, made from polyphenylene ether (PPE), developed by proprietary technology of Mitsubishi Gas Chemical Company, Inc., and polystyrene (PS) as major components. Iupiace provides well-balanced properties (mechanical, electrical, thermal, flame retardancy, dimension stability, etc.) together with the lowest density among common engineering plastics, also possessing UL Standard certification, enabling such wide applications as inner parts of electronic/office automation (OA) equipment, automobile outer parts and water pump parts.

LEMALLOY is a brand name of our modified polyphenylene ether resin (m-PPE resin) polymer-alloy type products (island-sea structure), consisting of polyphenylene ether (PPE) as the island and crystalline resins such like polyamides (PA) and polypropylene (PP) as the sea. LEMALLOY therefore provides well-balanced properties of crystalline resin (chemical resistance and moldability) and PPE resin (dimension stability and high-temperature rigidity), enabling use under various environments.

NOVADURAN is a name of a polybutylene terephthalate (PBT) resin made and sold by Mitsubishi Engineering Plastics.
NOVADURAN offers excellent mechanical properties, rigidity, heat aging resistance and chemical resistance. NOVADURAN also provides superb moldability, abrasion resistance, colorability and electric properties.

Synthetic paper, from its early development and historical evolution, has typically been manufactured using synthetic resin derived from petroleum as its primary material. Naturally, this has given it characteristics similar to those of plastic film, but its appearance is remarkably similar to that of regular paper made from wood pulp. In addition, many synthetic papers have properties similar to those of regular paper.

YUPO® is a synthetic paper made mostly from polypropylene film to which inorganic fillers and small amounts of additives are added. In principle, the film is formed while creating microvoids by stretching it biaxially. The most distinguishing feature is its multilayer construction, which consists of a base layer and paper-like layers laminated on either side, whose thickness can be adjusted to provide products ranging from thin to thick. This manufacturing process is shown in the flow sheet in Figure 1. The specific YUPO® manufacturing process is a proprietary technology unique to our company, and numerous patents have been established for it in Japan, Europe and the USA, as well as for the composition.