AIRLINER is a duct material with the strength of a steel sheet with the properties of a PVC film.
With functionality only possible in composite materials, this product is used to create more comfortable living environments.

Mitsubishi Chemical Infratec【AIRLINER】[Open in a new window]

Inquiries

Characteristics

[Close]

  • AIRLINER is a duct material that has the strength of a steel sheet with the properties of a PVC film.
  • This material has excellent corrosion, weather, and chemical resistance so that it is impervious to many corrosive gases.

    *AIRLINER may not be suitable for use depending on the usage environment. Contact us if you have any questions.

  • AIRLINER improves productivity and efficiency as it does not require metal substrate processing or post-coating.

Specifications

[Close]

Steel sheet PVC film Size
(mm)		 Packaging unit
(sheets)		 Order unit
(sheets)		 Lead time
Type Thickness
(mm)		 Thickness
(mm)		 Color
(color code)
JIS G3302
Galvanized Steel Sheet
(*1)		 0.5 Surface 0.2 mm
/
Rear Surface 0.2 mm		 Gray
(H716)		 914
×
1,829		 25 At least 1 package Approximately 3 to 5 days
(contact us)
0.6 20
0.8 15
  1. *1 JIS G3302 galvanized steel sheet or equivalent/higher quality steel is used.

Durability

[Close]

  Specific test Testing method Test result
Adhesion Waterproof test at ordinary temperature One-month dipping in water at ordinary temperature No separation
Heat test 240 hours in oven at 100°C
Deformation resistance test 20% elongation
Deformation resistance test and waterproof test at ordinary temperature One-month dipping in water at ordinary temperature after 20% elongation
Deformation resistance test and boiling water resistance test 240 hours in oven at 100°C after 20% elongation
Processability Adhesion test 5 mm cross-cutting, Erichsen 8 mm extrusion
Waterproof test at ordinary temperature and adhesion test 5 mm cross-cutting after one-month dipping in water at ordinary temperature
Erichsen 8 mm extrusion
Boiling water resistance test and adhesion test Eight-hour dipping in boiling water and 16-hour dipping in water at ordinary temperature
5 mm cross-cutting after three alternating cycles
Erichsen 8 mm extrusion
Heat test and adhesion test 5 mm cross-cutting after 240 hours in oven at 100°C
Erichsen 8 mm extrusion		 No cracking, breakage,
and separation
Bending test 90-degree bend at -10°C, R=0
Bending test 180-degree bend at 0°C
Drawability Cylindrical drawing: 50 mm in φdiameter and 40 mm in depth
Humidity Humidity 5,000 hours at 60°C, ×98% Nothing abnormal
Corrosion resistance Salt spray test 5% saline solution at 35°C for 5,000 hours
Heat resistance Heat test 2,000 hours in oven at 90°C
Weather resistance Accelerated weather resistance test 3,000 hours in Sunshine Weather-Ometer No rust, breakage, or marked fading
Chemical resistance 10% sulfuric acid dipping Washing after one-week dipping No rust, stain, or marked fading
10% hydrochloric acid dipping Washing after one-week dipping
10% acetic acid dipping Washing after one-week dipping
10% caustic soda solution dipping Washing after one-week dipping
Kerosene dipping Washing after one-week dipping
Gasoline dipping Washing after one-week dipping
  • *Please contact us to inquire on the certification of fire-resistant materials.

Other

[Close]

Custom orders

Non-standard large plates, wide coils, and slit coils must be custom ordered.

The minimum lot size for custom orders is 2.5 tons per specification. The lead time is approximately 60 days.

Contact us directly if you desire a color other than gray (H716).

Refinish coatings

The HISIPAINT™ 2 refinish paint is available in the same color (gray: H716) as the AIRLINER product.

Small lots are available in custom orders of either one 3 kg can or three 1 kg cans, so contact us directly to order.

Inquiries Concerning Products

Mitsubishi Chemical Infratec

View the products of Mitsubishi Chemical Infratec[Open in a new window]