324 products.

Filter by business area

[Close]

46 products.

[Close all]

PTMG

PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (for example MDI, TDI), etc. to make resins with excellent properties.

  • Grades: PTMG650、PTMG850、PTMG1000、PTMG1300、PTMG1500、PTMG1800、PTMG2000、PTMG3000、PTMG4000(under development)
  • CAS: No. 25290-06-1
  • Japan, Chemical Substances Control Law: METI-No. 7-129
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous Material Class 4 Petroleums No.4 Hazardous Rank III (PTMG650,850), Combustible Materials, Flammable Solids (PTMG1000, 1300, 1500, 1800, 2000, 3000, 4000(under development))


Maleic Anhydride

Maleic anhydride is produced by oxidation of benzene or a C4 hydrocarbon such as butane in the presence of a vanadium oxide catalyst. Maleic anhydride can be converted to maleic acid by hydrolysis and to esters by alcoholysis.

  • CAS: No. 108-31-6 (T)
  • EINECS: No. 203-571-6
  • Japan, Chemical Substances Control Law: METI-No. 2-1101
  • Japan, Industrial Safety and Health Law: ID No. 554 (SDS required)
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Not applicable.

THF

THF (Tetrahydrofuran) is a stable compound with relatively low boiling point and excellent solvency. It is widely-used for dissolution and reaction of various substances. Also it is used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc. Since 1982, Mitsubishi Chemical's Yokkaichi plant has produced high-purity, high-quality THF from butadiene using our proprietary technology.

  • CAS: No. 109-99-9 (T)
  • EINECS: No. 203-726-8
  • Japan, Chemical Substances Control Law: METI-No. 5-53
  • Japan, Industrial Safety and Health Law: No. 5-53, ID No. 367 (SDS required)
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous Material Class 4 Petroleums No.1 (water-soluble liquid). Hazardous Rank II
  • U.N. Class: 3
  • U.N. No.: UN2056

NMP

NMP (N-Methyl-2-Pyrrolidone) is a polar solvent with outstanding characteristics. It has a wide range of applications because it offers very high solvency, high boiling point, low freezing point, and ease of handling.

  • CAS: No. 872-50-4 (T)
  • EINECS: No. 212-828-1
  • Japan Chemical Substances Control Law: METI-No. 5-113
  • Japan, Industrial Safety and Health Law: No. 8-1-1014
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

GBL

GBL has a wide range of practical applications because of its low freezing point, high boiling point, and a unique combination of solvent and electrical properties. It has applications as a solvent for special resins, in photography, in batteries, and as an electrolyte. Also a number of derivatives are synthesized from GBL.

  • CAS: No. 96-48-0 (T)
  • EINECS: No. 202-509-5
  • Japan Chemical Substances Control Law: METI-No. 5-3337
  • Japan, Industrial Safety and Health Law: No. 5-3337
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).Aprotic, polar solvent.

2P

2P (2-Pyrrolidone) is a widely-used solvent with outstanding characteristics. It is miscible with almost all other organic solvents and has a high boiling point.

  • CAS: No. 616-45-5 (T)
  • EINECS: No. 210-483-1
  • Japan, Chemical Substances Control Law: METI-No. 5-112
  • Japan, Industrial Safety and Health Law: No. 5-112
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

12BG

12BG (1,2-butanediol) is a glycol with hydroxyl groups on the first and second carbon of the 4-carbon chain. It can react with a dicarboxylic acid (for example phthalic acid or adipic acid), for use as a polyester polyol or a plasticizer. Moreover, it is also possible to make it react with an unsaturated dicarboxylic acid (for example, maleic anhydride) for use as an unsaturated polyester resin raw material.

  • CAS: No. 584-03-2 (T)
  • EINECS: No. 209-527-2
  • Japan, Chemical Substances Control Law: METI-No. 2-235
  • Japan, Industrial Safety and Health Law: No. 2-235
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

14BG

14BG (1,4-Butanediol) is a straight chain glycol with hydroxyl groups on both ends. It is used as a raw material for high performance polyester and polyurethane resins as well as for industrial chemicals like tetrahydrofuran and gamma-butyrolactone. Since 1982, Mitsubishi Chemical's Yokkaichi plant has produced high-purity, high-quality 14BG from butadiene using our proprietary technology.

  • CAS: No. 110-63-4 (T)
  • EINECS: No. 203-786-5
  • Japan, Chemical Substances Control Law: METI-No. 2-235
  • Japan, Industrial Safety and Health Law: No. 2-235
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

PCD_BENEBiOL™

Polycarbonatediol(PCD) is a linear polycarbonate with hydroxyl groups at both ends. It easily reacts with isocyanate compounds (e.g. MDI, TDI, IPDI, H12MDI) and generates polymers with superior characteristics described below.
The proprietary manufacturing technology of Mitsubishi Chemical Corporation (MCC) enables production of unique composition and higher molecular weight PCDs with stable product qualities. The resins made from MCC’s PCDs "BENEBiOL™" have unique properties that existing resins have not been able to establish. In addition, some of the PCDs’ raw materials are biomass-based.

  • Chemical resistance
  • Hydrolysis resistance
  • Weather resistance
  • Flexibility at low temperature
  • Abrasion resistance
  • High mechanical properties
  • High hardness
  • Biomass-based

Corebrid B is an acrylic staple fiber with a conductive sheath-core structure and light-absorbing heat generating property.
Inserting a high concentration of conductive and light-absorbing heating particles into the core creates a higher level of performance in comparison with fibers inserted using traditional methods.

Corebrid™ is an acrylic fiber produced by the world's only wet-spun, sheath-core composite spinning technology, which was developed by Mitsubishi Chemical.

This sheath-core fiber structure consists of core and sheath which enables different material combination to offer various functions. We are the first company to use such technology to produce this wet-spun fiber type.

VonnelTM is our company’s acrylic fiber brand and the main ingredient is acrylonitrile (AN). It has a soft and warm texture similar to cashmere and wool. It is used in sweaters, cut and sewn products, underwear, and socks. It is also used in non-clothing applications such as eco-fur, blankets, carpets, and non-woven fabric.

CARBOLEADER is a carbon roller simultaneously realizing lightweight, high stiffness and a high critical number of revolutions. The product is used in a comprehensive range of fields including LCDs, film manufacturing, printing, and papermaking and substantially contributes to improve production quality, acceleration of production speed, and productivity improvement by reduced defect rates and cost reduction.

We launched the ALPOLIC business in 1971 and major applications were for sign boards and housing materials around that time. ALPOLIC has been recognized in its advantages of high rigidity and superior flatness since the beginning. In the 1980s, we set up a continuous coating line for aluminum coils, and thanks to the coating quality, the features of ALPOLIC were upgraded. Since the 1990s when we completed the improvement of fire retardant plastic core material, ALPOLIC has been widely used as a wall cladding material instead of a solid aluminum panel. In the early 2000s, we started to develop stainless and titanium composite sheets and also added many other color options of our products to meet demand for more attractive designs. Mitsubishi Chemical's ALPOLIC has been in the confidence of customers over 40 years around the world and continues to be a world leading ACM.

Nichigo G-Polymer, which can be used to freely control crystallinity and the cohesive power of the noncrystalline part, is the next generation of vinyl alcohol resins.
In addition to outstanding transparency and solvent resistance, through the combination of “low crystallinity” with “high hydrogen bonding strength,” which are traits that are ordinarily in conflict, this new material realizes functions that had not been possible with conventional PVOH. These include low melting points, high stretching characteristics and high gas barrier performance, as well as low foaming, aqueous solution stability and emulsification performance.

Soaresin is used as a modifier of resin or as a stabilizer for extrusion.

Hi-Selon is a water-soluble film made from polyvinyl alcohol.It is available in a wide range of types, from those that are soluble in cold water to those that are soluble in hot water, to respond to diverse needs.With its excellent heat-sealing property and printability, Hi-Selon is ideal for use as a packaging material, but it also provides many other advantages, including high solvent resistance and gas barrier performance, which benefit diverse applications and are widely used as materials for packaging agricultural chemicals and pharmaceuticals, hygiene purposes, printing on curved surfaces, and as base materials for wigs and embroidery.

Global Network

[Close]

Mitsubishi Chemical Logistics Corporation  can provide the logistics service of the highest standards and quality, based on the results and experience of many years used mainly chemicals.We also can undertake business agency of trade in general, such as advice of trade transactions and paperwork.

We can provide the logistics services of the highest standards and quality, based on the results and experience of many years used mainly chemicals.
In addition, we have a large number of staffs who are familiar with the various logistics services to a wide variety of items not only chemicals and dangerous goods but also auto parts, building materials, food and consumer goods, we will closely meet your needs.
Please contact our person in charge willingly available, such as logistics cost reduction, all consultation,etc.

The Overseas Division as a part of the Marine Business Department in MCLC was established in 2000 in order to globalize our marine transportation business. Nowadays we offer a tanker fleet for Petrochemical Products, Vegetable Oils and CPP, covering the areas of the Middle East, India, South East Asia and Far East Asia.

Synthetic paper, from its early development and historical evolution, has typically been manufactured using synthetic resin derived from petroleum as its primary material. Naturally, this has given it characteristics similar to those of plastic film, but its appearance is remarkably similar to that of regular paper made from wood pulp. In addition, many synthetic papers have properties similar to those of regular paper.

YUPO® is a synthetic paper made mostly from polypropylene film to which inorganic fillers and small amounts of additives are added. In principle, the film is formed while creating microvoids by stretching it biaxially. The most distinguishing feature is its multilayer construction, which consists of a base layer and paper-like layers laminated on either side, whose thickness can be adjusted to provide products ranging from thin to thick. This manufacturing process is shown in the flow sheet in Figure 1. The specific YUPO® manufacturing process is a proprietary technology unique to our company, and numerous patents have been established for it in Japan, Europe and the USA, as well as for the composition.