324 products.

Filter by business area

[Close]

166 products.

[Close all]

PTMG

PTMG (Poly(tetramethylene ether)glycol / PTMG) is a linear polyether glycol with hydroxyl groups on both ends. As a polyol, it reacts readily with isocyanates (for example MDI, TDI), etc. to make resins with excellent properties.

  • Grades:
    PTMG650、PTMG850、PTMG1000、PTMG1300、PTMG1500、PTMG1800、PTMG2000、PTMG3000、PTMG250(under development)、PTMG4000(under development)
  • CAS No.:
    25290-06-1
  • Japan, Chemical Substances Control Law:
    METI-No. 7-129
  • Japan, Poisonous and Deleterious Substances Control Law:
    Not applicable.
  • Japan, Fire Services Law:
    Hazardous Material Class 4 Petroleums No.3 Hazardous Rank III (PTMG250(under development))
    Hazardous Material Class 4 Petroleums No.4 Hazardous Rank III (PTMG650,850)
    Combustible Materials, Flammable Solids (PTMG1000, 1300, 1500, 1800, 2000, 3000, 4000(under development))

Maleic Anhydride

Maleic anhydride is produced by oxidation of benzene or a C4 hydrocarbon such as butane in the presence of a vanadium oxide catalyst. Maleic anhydride can be converted to maleic acid by hydrolysis and to esters by alcoholysis.

  • CAS: No. 108-31-6 (T)
  • EINECS: No. 203-571-6
  • Japan, Chemical Substances Control Law: METI-No. 2-1101
  • Japan, Industrial Safety and Health Law: ID No. 554 (SDS required)
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Not applicable.

THF

THF (Tetrahydrofuran) is a stable compound with relatively low boiling point and excellent solvency. It is widely-used for dissolution and reaction of various substances. Also it is used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc. Since 1982, Mitsubishi Chemical's Yokkaichi plant has produced high-purity, high-quality THF from butadiene using our proprietary technology.

  • CAS: No. 109-99-9 (T)
  • EINECS: No. 203-726-8
  • Japan, Chemical Substances Control Law: METI-No. 5-53
  • Japan, Industrial Safety and Health Law: No. 5-53, ID No. 367 (SDS required)
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous Material Class 4 Petroleums No.1 (water-soluble liquid). Hazardous Rank II
  • U.N. Class: 3
  • U.N. No.: UN2056

NMP

NMP (N-Methyl-2-Pyrrolidone) is a polar solvent with outstanding characteristics. It has a wide range of applications because it offers very high solvency, high boiling point, low freezing point, and ease of handling.

  • CAS: No. 872-50-4 (T)
  • EINECS: No. 212-828-1
  • Japan Chemical Substances Control Law: METI-No. 5-113
  • Japan, Industrial Safety and Health Law: No. 8-1-1014
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

GBL

GBL has a wide range of practical applications because of its low freezing point, high boiling point, and a unique combination of solvent and electrical properties. It has applications as a solvent for special resins, in photography, in batteries, and as an electrolyte. Also a number of derivatives are synthesized from GBL.

  • CAS: No. 96-48-0 (T)
  • EINECS: No. 202-509-5
  • Japan Chemical Substances Control Law: METI-No. 5-3337
  • Japan, Industrial Safety and Health Law: No. 5-3337
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).Aprotic, polar solvent.

2P

2P (2-Pyrrolidone) is a widely-used solvent with outstanding characteristics. It is miscible with almost all other organic solvents and has a high boiling point.

  • CAS: No. 616-45-5 (T)
  • EINECS: No. 210-483-1
  • Japan, Chemical Substances Control Law: METI-No. 5-112
  • Japan, Industrial Safety and Health Law: No. 5-112
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

12BG

12BG (1,2-butanediol) is a glycol with hydroxyl groups on the first and second carbon of the 4-carbon chain. It can react with a dicarboxylic acid (for example phthalic acid or adipic acid), for use as a polyester polyol or a plasticizer. Moreover, it is also possible to make it react with an unsaturated dicarboxylic acid (for example, maleic anhydride) for use as an unsaturated polyester resin raw material.

  • CAS: No. 584-03-2 (T)
  • EINECS: No. 209-527-2
  • Japan, Chemical Substances Control Law: METI-No. 2-235
  • Japan, Industrial Safety and Health Law: No. 2-235
  • Japan, Poisonous and Deleterious Substances Control Law: Not applicable.
  • Japan, Fire Services Law: Hazardous material Class 4 Petroleums No.3 (water-soluble liquid).

PCD_BENEBiOL™

Polycarbonatediol(PCD) is a linear polycarbonate with hydroxyl groups at both ends. It easily reacts with isocyanate compounds (e.g. MDI, TDI, IPDI, H12MDI) and generates polymers with superior characteristics described below.
The proprietary manufacturing technology of Mitsubishi Chemical Corporation (MCC) enables production of unique composition and higher molecular weight PCDs with stable product qualities. The resins made from MCC’s PCDs "BENEBiOL™" have unique properties that existing resins have not been able to establish. In addition, some of the PCDs’ raw materials are biomass-based.

  • Chemical resistance
  • Hydrolysis resistance
  • Weather resistance
  • Flexibility at low temperature
  • Abrasion resistance
  • High mechanical properties
  • High hardness
  • Biomass-based

Biocatalyst

[Close]

We launched the world's first biocatalytic industrial production of acrylamide in 1985 and have been offering this product since 1999.

A unique tie-layer resin offering excellent adhesive performance to a variety of materials, covering various applications and requirements for automotive, food/non-food packaging, industry and building/construction.
MODIC™ offers two technologies designed to be used as a tie-resin or for peelable purposes:

ZELAS™ are polymers designed for medical applications including R-TPO, specialty TPE compounds and tie layer resins. Specific solutions designed for film, tube and injected components for medical applications.

Polybutylene succinate (PBS) is the biodegradable plastic that decomposes into water and carbon dioxide with the microorganism under the soil. PBS has a high heat resistance among the general biodegradablility resin, and PBS has high compatibility with a fiber. Using these goodness, it's possible to achieve the performance which can't be shown by itself as the compound with other resin and material.duct life cycle.

Biaxially oriented polystyrene sheets were first commercialized in Japan. Polystyrene tends to crack during the thinning process. As such, biaxially oriented processing is used for this material to give it practical strength. This also gives the material excellent transparency and thermoformability. This material is used for many food packaging applications.

  • *Santoclear is a registered trademark of Solutia Inc. and used here under license.

Transparent gas barrier sturucture, SiOx vacuum coated technologies on OPET, OPA. Excels in gas barrier properties as well as aroma substances, chemical resistance and robust processability for printing, bag making process and consistency of oxygen / humidity barrier properties under high temperature and humidity. TECHBARRIER can be widely used for packaging materials in medical, pharmaceutical, industrial and food market.

PET Bottles

[Close]

Our lineup of PET bottles focuses on meeting the needs of food, seasoning, and alcoholic beverage customers. We are also developing cosmetics, medicine, and industrial applications of our high-barrier bottles originally designed for the food and seasoning industry to preserve freshness and extend shelf life.

Multilayer Non-PVC, Polyolefin cling film for food packaging. Used for most foods including food in restaurants.

Stretch films used for tray packaging of fresh food. Equipped with excellent gloss / luster properties, self-stickiness, compatibility with automatic packaging machines, meets customer's needs with stable quality.

Bi-axially oriented polyamide film has good impact strength and excellent heat resistance. We also have a bi-axially oriented barrier polyamide film with high gas barrier property. It is useful to make shelf life longer in many foods.

DIAMIRON is a multilayer film combining polyamide, EVOH, polyolefin etc. by our proprietary technology. No chlorinated resin is used. Flat and tube types are available. A wide range of applications as deep drawing and vacuum packaging include food packaging, medical devices, and industrial materials.
DIAMIRON is produced under ISO9001 and FSSC22000-compliant quality control.

Applications

  • For food packaging
  • For medical device packaging
  • For transfusion bags
  • For industrial materials

Tubular plastic tube that shrinks when heated for easy coating. The product is widely used in such applications as insulation, color-coding, protection and falsification prevention.
Download the catalog in PDF format for more information on the features and sizes of products.

Capable of advanced separation and purification in chromatographic separation of products thanks to smaller particle size than DIAION™ HP20 and SP207, which have excellent adsorption properties. This series consists of HP20SS, SP20SS with smaller particle size, and SP207SS.

Amphoteric Ion-Exchange Resin

DIAION™ AMP03 is an amphoteric ion-exchange resin with a quaternary ammonium group and carboxy group incorporated into the crosslinked polystyrene backbone. Thanks to uniform 260 µm beads size, AMP03 realizes sharp elution peak in the separation of electrolytes from non-electrolytes, between electrolytes (sodium chloride and sodium sulfate), etc.

MCI GEL™ packing materials for high performance liquid chromatography are synthetic polymer products for use as ion exchange resins, non-functional reverse-phase support, hydrophilic porous gels, etc. Particle size ranges from 4µm to more than 100µm. Quantities for analytical applications up to production-scale fractionation are available. We are prepared to supply materials such as ion exchange resins for glycoamino acid analysis, polymer adsorbent for reverse-phase chromatography, various column packings for protein separation, etc.

MCI GEL (HPLC packed columns)

These are HPLC separation columns that achieve high-resolution separations utilizing our proprietary column packing technology that features the high-quality MCI™ GEL packing material. MCI GEL packed columns serve application fields such as amino acid analysis, protein analysis, common organic compound analysis, and ion chromatography.

The Synthetic Adsorbents are cross-linked polymer spheres which provide specific surface area of 500-1200m2/dry-g with their porous structure. Available products include the aromatic-based HP series, the aromatic-based SP series, and the methacrylate ester-based HP2MG. They are used for the adsorption purification of peptides, proteins, polyphenols, cephalosporin C, etc. as well as for the removal of bitter-tasting substances from fruit juices.

A chelating resin has a functional group that is capable of forming a chelate (complex) with a metal ion. The specific metals that can form chelates with the functional group can be captured. In the DIAION™ CR Series, there are three product types: (1) for common metals -- DIAION™ CR11 with the iminodiacetic acid functional group, (2) for metals other than alkali metals (Na, K, etc.) or alkaline earth metals (Ca, Mg, etc.) -- DIAION™ CR20 with the polyamine group, and (3) for selectively capturing boric acid --- CRB03 and CRB05 with the methylglucamide group.

The low-odor, low-leachable anion exchange resin reduces the release of total organic carbon (TOC) and amines to prevent offensive odors.

Acrylic-based

The weakly basic anion exchange resins use either a polystyrene or polyacrylic ester frame and a primary-ternary amino group as the functional group. Although the anion of a salt like NaCl or Na2SO4 cannot be exchanged, the exchange of an anion of a mineral acid such as HCl and H2SO4, or the salt of a weak base like NH44Cl can be carried out.

Type I Structure:  Strongly basic anion exchange resin

An amino functional group is incorporated into the anion exchange resin enabling the exchange of anions like the Cl- ion and the SO4-- ion. Strongly basic anion exchange resins and weakly basic anion exchange resins can be defined according to the basic strength of the amino functional group.
The ion exchange resin that has a quaternary ammonium group is strongly alkaline and dissociates just like NaOH and KOH. Therefore it is called a strongly basic anion exchange resin.

Methacrylic acid-based weakly acidic cation exchange resin

The weakly acidic cation exchange resins have the carboxylic acid group (-COOH) as the exchange group. There are two kinds --- a methacrylic acid type and an acrylic acid type. The acrylic acid weakly acidic cation exchange resin is used for processing water with high carbonate hardness. The methacrylic acid type is used for purification of antibiotics and amino acids.

DIAION™ Series(Strongly Acidic Cation Exchange Resins)

The strongly acidic cation exchange resins are bead-like products which have a sulfonic acid group in the cross-linked styrene frame. They can be used across the full pH range (0-14), and are relatively stable to temperature, even withstanding high temperatures of 100-120℃. They are used in a wide variety of fields including water purification, water softening, wastewater treatment, purification of pharmaceuticals and food, and catalysis.

Zeolite membrene KonKer™

KonKer™, the zeolite membrane for food dehydration and concentration from Mitsubishi Chemical, can be used with a variety of liquid foods, making it possible to safely concentrate and dehydrate without the use of heat while preserving flavor and fragrance components.

We develop separation and purification technologies to produce manufacturing process systems for pharmaceuticals, chemicals, and food.

We provide optimal water treatment systems that produce clean water necessary for life and per specific customer requirements.

D610A is a mixure of adipates synthesized from straight-chain higher alcohols. It is a plasticizer with excellent plasticization efficiency, cold resistance, and processability that is ideal as a food packaging material.

As DOP shows well-balanced each performance, it is a typical general purpose plasticizer used most widely as a vinyl chloride resin plasticizer.

DOP is a typical general purpose plasticizer used most widely as a vinyl chloride resin plasticizer.DOP-MS is DOP with practically no odor.

Diisononyl phthalate (DINP) is a phthalic acid ester of isononyl alcohol (carbon number 9), and it is used as a plasticizer.

Diisodecyl phthalate (DIDP) is a plasticizer with superior low volatility, heat aging resistance, and soap water extraction resistance, and it is used for wide range of flexible PVC. Since the change of tensile strength or elongation is low after heating, it can be used for the products that are used at relatively high temperature.

Diundecyl phthalate (DUP) is a plasticizer used for flexible PVC. This is phthalate using undecyl alcohol by oxo process, and it is low volatility plasticizer with good miscibility and machinability.

D930 (bis (2-butoxyethyl) phthalate) is used mainly as the plasticizer of flexible PVC, and also as resin reforming agent since it has miscibility with many resins due to having an ether bond in its molecule.

M170 is a plasticizer with superior antistatic performance by blending special additive, D930 (Bis (2-butoxyethyl) phthalate) and D610A (Di-n-alkyl adipate).

By blending special additive to D930 (Bis (2-butoxyethyl) phthalate), D950 has drastically been improved the antistatic performance, and also has superior heat resistance.

Di(2-ethylhexyl) adipate (DOA) is a cold resistant plasticizer giving superior low temperature flexibility against vinyl chloride resin and synthesized rubber.It also has superior heat and light stabilities, and machinability is good for a cold resistant plasticizer.

Diisononyl adipate (DINA) is a adipate ester of isononyl alcohol (carbon number 9).It is appropriate for wide range of application as a plasticizer.

Benzoic acid glycol ester JP120 has the highest polarity of any plasticizer from J Plus Co., Ltd. and is miscible with a variety of resins.

Bis(2-ethylhexyl) terephthalate (J110) is a plasticizer that is compatible generally with soft vinyl chlorides and that has better heat-aging resistance and electrical insulation properties, compared to DOP.

Acetyl tributyl citrate (ATBC) has low toxicity when used as a plasticizer for vinyl chloride resins and is ideal for food packaging.It also has good workability.

D640A has a relatively low molecular weight for a member of the polyester adipate plasticizer product group. It has good workability and excellent cold resistance, in addition to its oil resistance, low volatility, and non-migration property.

The polyester adipate plasticizer product group offers excellent oil resistance and non-migratory property, as well as low volatility. D643D is characterized within its product group by its relatively large molecular weight and good heat-aging resistance characteristics.

D623N, which has a relatively high molecular weight for a member of the polyester adipate plasticizer product group, offers excellent heat-aging resistance, as well as oil resistance, low volatility, and non-migratory property.

D620N has a molecular weight of 800, which is relatively low for a polyester adipate plasticizer. It has excellent workability and cold resistance, in addition to its oil resistance, low volatility, and non-migratory property.

The polyester adipate plasticizer product group offers excellent oil resistance and non-migratory property, as well as low volatility. Additionally, D633 has a relatively high molecular weight for the product group and excels in terms of heat-aging resistance and non-migration into ABS.

The polyester adipate plasticizer product group offers excellent oil resistance and non-migratory property, as well as low volatility.In addition, D645 has high molecular weight for a member of the polyester adipate plasticizer product group and excellent heat-aging resistance.

D643 is a general-purpose polyester plasticizer that performs like other polyester plasticizers in terms of oil resistance, low volatility, non-migratory property, and so forth. It also offers a balance between cold resistance and plasticization efficiency.

Polyester adipate plasticizer product group has superior oil resistance, low volatility, and non-migratory property.D623 has molecular weight of approximately 1800, having relatively high molecular weight for a member of the polyester adipate plasticizer product group, and has superior oil resistance, heat deterioration property, and non-migratory property.

D621 is a polyester adipate plasticizer with molecular weight of approximately 1,200, and it has superior oil resistance, low volatility, and non-migratory property.

D620 is a polyester adipate plasticizer with molecular weight of approximately 800.It has superior oil resistance, low volatility, and non-migratory property.D620 has low molecular weight for a member of the polyester adipate plasticizer product group, has good workability, and superior cold resistance.

TOTM-NB is the TOTM without antioxidant added.This is a durable plasticizer with superior low volatility, electrical characteristics, heat deterioration resistance, and soap water resistance, and has superior non-migratory property against ABS resin.

Trioctyl trimellitate (TOTM) is a durable plasticizer with superior low volatility, electrical characteristics, heat deterioration resistance, and soap water resistance.

D931 (Bis(2-butoxyethyl) adipate) is a plasticizer with cold resistance property as its feature.Since it has an ether bond in its molecule, it has miscibility with many rubber and resin materials.

DIDA (Diisodecyl adipate) is a plasticizer with low volatility and cold resistance properties.

Home water purifier using hollow fiber membrane material. We off a full lineup of high-performance water purifiers including faucet-mounted models, pitcher models, built-in models, and commercial models. We provide the water necessary for life through products to stockpile water for long periods of time and water-softening shower heads with built-in cartridges.
Refer to the Cleansui website for more information.

Sodium acetate (trihydrate) is widely used as a shelf-life extending agent, pH regulator, etc. as it has properties to solve in water well.

Sodium acetate (anhydrous) is widely used as a shelf-life extending agent, pH control agent.

Sodium diacetate is sodium acetate with slight flavor of acetic acid. It is used as a sour agent and pH regulator.

Acetic acid (industrial grade) is used in large quantities around the world as raw material for various kinds of synthesis (e.g., vinyl acetate monomers), as raw material for pharmaceuticals, as a food additive, and for other uses.

SoarnoL™ EVOH (ethylene vinyl alcohol copolymer) is a world renowned gas and hydrocarbon barrier resin used in multilayer barrier packaging.

Reny is our brand name of high performance polyamide compound reinforced with glass fiber, carbon fiber or mineral fillers, based on proprietary polyamides (mainly polyamide MXD6) developed by Mitsubishi Gas Chemical Company, Inc. Reny generally has he highest mechanical strength and modulus  in engineering plastics, most suitable for replacement of metal parts.

Iupital is a high-grade polyacetal (POM) resin using proprietary “copolymer” manufacturing technology of Mitsubishi Gas Chemical Company, Inc. The integrated production system, which takes the raw material methanol through POM resin polymerization to the end product (pellet), enables us to consistently manufacture and supply high-quality products. To meet a wide range of customer requirements, Iupital is produced in a variety of grades. These include high-performance grades, which make Iupital ideal for applications in such fields as electronics, office automation (OA) equipment, automobiles and precision machinery.

Iupiace is our modified polyphenylene ether (m-PPE) resin products, made from polyphenylene ether (PPE), developed by proprietary technology of Mitsubishi Gas Chemical Company, Inc., and polystyrene (PS) as major components. Iupiace provides well-balanced properties (mechanical, electrical, thermal, flame retardancy, dimension stability, etc.) together with the lowest density among common engineering plastics, also possessing UL Standard certification, enabling such wide applications as inner parts of electronic/office automation (OA) equipment, automobile outer parts and water pump parts.

LEMALLOY is a brand name of our modified polyphenylene ether resin (m-PPE resin) polymer-alloy type products (island-sea structure), consisting of polyphenylene ether (PPE) as the island and crystalline resins such like polyamides (PA) and polypropylene (PP) as the sea. LEMALLOY therefore provides well-balanced properties of crystalline resin (chemical resistance and moldability) and PPE resin (dimension stability and high-temperature rigidity), enabling use under various environments.

NOVADURAN is a name of a polybutylene terephthalate (PBT) resin made and sold by Mitsubishi Engineering Plastics.
NOVADURAN offers excellent mechanical properties, rigidity, heat aging resistance and chemical resistance. NOVADURAN also provides superb moldability, abrasion resistance, colorability and electric properties.

Wasaouro™ is an anti-bacterial agent researched and developed to improve the non-perishability of food products and to retain their freshness by applying the anti-bacterial strengths of allyl mustard oil, which is found in wasabi.

LACRIS-S is a Bacillus coagulans for foods separated from the green malt, and with excellent characteristics not seen in general lactic acid bacteria.

RYOTO™ Sugar Ester is a food emulsifier that esterizes sucrose and fatty acids derivedextracted from plantsvegetables. The brand has various characteristics depending on the type of fatty acid and the degree of esterization, and is widely used in detergents and industrial application, starting with the field of foods.

ERYTHRITOL

[Close]

Erythritol is a sweetener classified as a sugar alcohol, and is a natural sugar found in fermented foods such as wines and rice wines as well as fruits and mushrooms. According to the energy evaluation methods of the Ministry of Health and Welfare, it is the only sugar with a recognized energy value of 0kcal/g in Japan.

Dextranase reduces polysaccharide viscosity by dissolving the dextran in juice in the sugar manufacturing industry. This greatly reduces labor.

Synthetic paper, from its early development and historical evolution, has typically been manufactured using synthetic resin derived from petroleum as its primary material. Naturally, this has given it characteristics similar to those of plastic film, but its appearance is remarkably similar to that of regular paper made from wood pulp. In addition, many synthetic papers have properties similar to those of regular paper.

YUPO® is a synthetic paper made mostly from polypropylene film to which inorganic fillers and small amounts of additives are added. In principle, the film is formed while creating microvoids by stretching it biaxially. The most distinguishing feature is its multilayer construction, which consists of a base layer and paper-like layers laminated on either side, whose thickness can be adjusted to provide products ranging from thin to thick. This manufacturing process is shown in the flow sheet in Figure 1. The specific YUPO® manufacturing process is a proprietary technology unique to our company, and numerous patents have been established for it in Japan, Europe and the USA, as well as for the composition.