UV Curable Coatings DIABEAM™ for Lifestyle / Consumer Goods
DIABEAM™ UM series | Under / Top Coat for Metal Vapor Deposition
[閉じる]
DIABEAM™ UM series provides a strong bonding of the vapor deposition layer with ABS, PC, PET and PP while enhancing its appearance, heat and humidity resistance.
MCC has over 40 years of innovation and experience in supplying coatings widely used for metal vapor deposition.
| Grade | Suggested Applications |
Substrate | Recommended processing parameters | ||
|---|---|---|---|---|---|
| Thickness (Cured film) |
Solvent flash |
UV cure |
|||
| UM-1007U | Cosmetic bottles such as skin lotions, mascaras and foundations, eyeliners, lipsticks, and blushes. Electrical appliance parts such as vacuum cleaners, washers, cameras, and smartphones. |
ABS Polycarbonate PMMA |
10-20μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
| UM-965U | PP | 10-20μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
|
| UM-875T | Aluminum deposition layer | 10-15μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
|
*Substrate peak temp.
**Measured by EIT Power Puck II
DIABEAM™ MH series | Hard coat
[閉じる]
DIABEAM™ MH series bonds strongly onto plastic substrates enhancing its chemical, weather and abrasion resistance.
MCC has over 40 years of innovation and experience in supplying coatings widely used in various fields.
| Grade | Suggested Applications |
Substrate | Recommended processing parameters | ||
|---|---|---|---|---|---|
| Thickness (Cured film) |
Solvent flash | UV cure | |||
| MH-4181 | Cosmetic bottles such as skin lotions, mascaras and foundations, eyeliners, lipsticks, and blushes. Electrical appliance parts such as vacuum cleaners, washers, cameras, and smartphones. |
ABS Polycarbonate |
10-15μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
| MH-4220 | PET | 10-15μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
|
| MH-4195 | PMMA | 10-15μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
|
*Substrate peak temp.
**Measured by EIT Power Puck II
For further information (detailed conditions / typical results) or samples, please contact us.
