UV Curable Coatings
DIABEAM™ for Mobility
DIABEAM™ MH series | Weather-Resistant Hard Coat
[閉じる]
DIABEAM™ MH series bonds strongly onto plastic substrates enhancing its chemical, weather and abrasion resistance.
MCC has over 30 years of innovation and experience in supplying weather resistant hard coat widely used for exterior parts of automotive.
| Grade | Suggested Applications |
Features | Substrate | Recommended processing parameters | ||
|---|---|---|---|---|---|---|
| Thickness (Cured film) |
Solvent flash | UV cure | ||||
| MH-3881G | Exterior parts such as Millimeter-wave radar emblems, LiDAR, and Radiator grilles | Excellent weatherability, High abrasion resistance, and Good adhesion | Polycarbonate | 6-20μm | IR lamps: 1-3min. at 60-80°C* Forced air: 3-5min. at 60-80°C* |
Dose: 2500-7000mJ/cm2** Peak intensity: 150-400mW/cm2** |
| MH-4109 | Exterior / Interior parts such as Door Handles, Emblems, and Meter Panels | Good weatherability, Very high abrasion resistance, Good adhesion | Polycarbonate | 5-12μm | IR lamps: 1-3min. at 60-80°C* Forced air: 3-5min. at 60-80°C* |
Dose: 1500-6000mJ/cm2** Peak intensity: 80-300mW/cm2** |
| MH-4332 | Exterior / Interior parts such as Lamp lenses and Meter panels | Good weatherability, High scratch resistance, Good adhesion | PMMA | 3-8μm | IR lamps: 1-3min. at 60-80°C* Forced air: 3-5min. at 60-80°C* |
Dose: 800-3000mJ/cm2** Peak intensity: 80-200mW/cm2** |
*Substrate peak temp.
**Measured by EIT Power Puck II
DIABEAM™ UM series | Under / Top Coat for Metal Vapor Deposition
[閉じる]
DIABEAM™ UM series provides a strong bonding of the vapor deposition layer with ABS, PC and PMMA while enhancing its appearance, heat and humidity resistance.
MCC has over 40 years of innovation and experience in supplying coatings widely used for metal vapor deposition.
| Grade | Suggested Applications |
Substrate | Recommended processing parameters | ||
|---|---|---|---|---|---|
| Thickness (Cured film) |
Solvent flash | UV cure | |||
| UM-1273U (Under Coat) |
Exterior / Interior parts such as millimeter-wave radar emblems,switches and meter rings | ABS Polycarbonate PMMA |
10-20μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
| UM-1280T (Top Coat) |
Aluminum, Tin and Indium, etc. deposition layer | 10-15μm | IR lamps: 1-2min. at 50-70℃* Forced air: 2-4min. at 50-70℃* |
Dose: 1000-2000mJ/cm2** Peak intensity: 100-200mW/cm2** |
|
*Substrate peak temp.
**Measured by EIT Power Puck II
For further information (detailed conditions / typical results) or samples, please contact us.
DIABEAM™ for Lifestyle / Consumer Goods
